Products

PRO Supercleaner Universal (Product ready to use)
Cleaner - Stain Remover - Degreaser
Application :
1. Apply Pro Super Cleaner from bottom to top on the surface you want to clean .( preferably on dry support )
2. the product Leave for.
3. Wipe with a damp sponge or microfiber cloth or rinsed with clear water.
Do not allow the product to dry
PROFESSIONAL USE

Pro Supercleaner MAX Concentrated (Product diluted)
Cleaner - Stain Remover - Degreaser
Concentrated, professional version,
Application :
1. Apply Pro Super Cleaner from bottom to top on the surface you want to clean .( preferably on dry support )
2. the product Leave for.
3. Wipe with a damp sponge or microfiber cloth or rinsed with clear water. Do not allow the product to dry
Recommended dilution:
3 dosages according to the surfaces to be cleaned
-Light dosage
1:100 / 1:50 - (1-2 Cl) for 1L water
Glass, plexiglass, chrome, aluminum, body, marble, tiles
-Average dosage
1 to 2 scoops - 1:20 / 1:10 - (5 to 10cl) for 1L water
Vinyl, leather, fabrics, suede, plastics, carpets, black streaks, insects
Gelcoat, hull, sails, stroke, Hypalon, fenders, seal tiles, greasy soil,...
-High dosage
3 to 4 scoops - 1:6 / 1:5 - (15 - 20 clto) for 1L water
Purely used to permanently remove felt and ballpoint pen.
ULTRASONIC CLEANING / Dilution between 2 to 5% ( 1:50 /1:20 ) 2 - 5cl for 1L water of Pro Supercleanermax in the water of the ultrasonic cleaner, adjusted heating between 40 and 65 ° maximum, ultrasonic cleaning time: 2 to 30 minutes, depending on the contamination of the parts. Then rinse under running water and dry with an air gun.

PRO SuperCleaner Special Concentrated (Produced used pure or diluted)
Manual :
Applied neat to surfaces very dirty, can be diluted according to the degree of contamination, between 5 and 50 cl per liter of water ( 1:20 - 1:2 ).
Concentrate to be diluted Suitable for cleaning rims, chassis, galvanized iron, tarpaulins, passife stainless steel, lime, copper, bronze, brass. Removes rust, mineral dross. Does not attack the paint, glass and O-rings.
Important: Rinse the surface with water.
Precautions Do not use in direct sunlight and hot surfaces, exports at an unseen place, resistance testing.